AquArmor Moisture-Tolerant Basement Floor Systems: PCS Installation for Minnesota Homes
About the AquArmor System
AquArmor is a moisture-tolerant floor coating system formulated specifically for concrete slabs with elevated moisture vapor emission rates — the basement and below-grade slab conditions that cause standard polyaspartic and epoxy coatings to blister and delaminate. The AquArmor system uses a proprietary moisture-vapor-tolerant primer that chemically bridges elevated moisture transmission rates, creating a stable base for the decorative coating system above.
What Makes AquArmor Different
AquArmor's difference is entirely in its primer chemistry. Standard polyaspartic primers require moisture emission below 5-8 pounds MVER for reliable adhesion. AquArmor's moisture-tolerant primer bridges the gap — it's formulated to penetrate the concrete pore structure and bond under elevated moisture conditions, then cure to a stable, adhesion-accepting base coat surface. Without this primer, applying decorative coating over a high-moisture Minnesota basement slab produces predictable blistering failure. With AquArmor primer, the same slab becomes a reliable substrate for a finished coating system.
Where PCS Uses AquArmor
This includes basement floors throughout the service area, garage slabs adjacent to below-grade conditions, and any slab where prior coating attempts failed in a pattern consistent with moisture-driven delamination (oval blistering, center-of-floor lifting).
Installation Specifics
AquArmor installation by PCS follows the standard preparation sequence — diamond grinding to CSP 2-3 profile — then moisture testing confirmation, AquArmor primer application, and decorative polyaspartic system above. PCS confirms the installation timeline during the evaluation appointment.
Get a Free Project Evaluation
Permanent Coating Solutions LLC is based in Mayer, MN and serves Carver, Hennepin, Scott, Wright, and Sherburne counties. Contact us or call 612-508-3151.
Related: aquarmor moisture tolerant · Our Work
Frequently Asked Questions
How do I know if my basement needs AquArmor?
Signs include prior coating failures with blistering patterns, visible moisture on the slab surface in spring, or efflorescence (white mineral deposits) on the slab surface.
Is AquArmor more expensive than standard polyaspartic?
The AquArmor moisture-tolerant primer adds cost above standard systems. The premium is justified by the prevention of moisture-driven coating failure.
Can AquArmor be used on any basement floor?
AquArmor is designed for slabs with moisture vapor emission up to 25 lbs MVER. Slabs with active water infiltration (standing water from cracks) require drainage remediation before coating.
How long does AquArmor installation take?
PCS confirms the timeline during evaluation.